Chicago Electric 90599 manual Page

6c

Slot 2

provide enough ventilation to allow the unit to vent and cool properly.

6d Slot 1

2.Push the Top Link Bar (6d) down to slot 2 (to lock the frame assembly). See above.

3.Determine where you want to position the Frame Assembly (6a-6d)making sure it is facing south (for maximum sun exposure) with no obstructions in front of it. The Regulator (2) must be in a dry, well ventilated location nearby. If necessary, build a small structure that guarantees the unit will stay dry during rain or snow, and,

4.Secure the Frame Assembly (6a- 6d) to its mounting location using hardware (not supplied) through the four holes on the bottom of the Left and Right Triangle Frames (6a & 6b).

5.Carefully place each Solar Panel (1) on the front of the Frame Assembly (6a-6d)so that the bottom of each panel fits into the slot on the bottom of the Frame Assembly (6a-6d).

6.Lock the two eye hooks on the back- center frame into the two protruding bolts on the Top Link Bar (6d).

CAUTION: If the unit is to be mounted on a rooftop, be especially careful when climbing ladders and walking on sloped roofs. Additional hardware may have to be purchased if

SKU 90599 For technical questions, please call 1-800-444-3353. Page 6