Chicago Electric 92115 operating instructions Specifications, Unpacking, Operating Instructions

Specifications

Electrical Input	120 V~ / 60 Hz / 2.2 A (no load)
Motor Speed	0-2500 RPM (no load)
Capacity	Up to 14 gauge sheet metal
	Up to 18 gauge stainless steel

@150 inches per minute

Cutting Blades Tungsten Carbide Steel

Cutting Head Swivels 360°

Unpacking

When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible.

Operating Instructions

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

SWIVELING THE CUTTER HEAD

To prevent serious injury

from accidental operation:

Release the Trigger and unplug the tool from its electrical outlet before adjusting tool or installing accessories.

1.Put on heavy-duty work gloves and ANSI-approved safety goggles to avoid injury.

Figure 1

2.Loosen the three hex head bolts using the hex wrench provided with this tool - see Figure 1.

3.Firmly grip the cutter head and twist it to the desired position. Tighten the three hex bolts to keep the Cutter Head in that position.

		REV 06f, 10a
Page 8	For technical questions, please call 1-800-444-3353.	SKU 92115