SKU 92496 PAGE 5
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on the Heavy Duty Welding Kit. These carry
important information. If unreadable or missing, contact Harbor Freight Tools for
a replacement.
2. Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris.
3. Prevent eye injury and burns. Wearing and using personal safety clothing and
safety devices reduce the risk for injury. Wear ANSI approved welding goggles
(such as those included in this kit) featuring at least a number 10 shade lens rating.
Leather leggings, fire resistant shoes or boots should be worn when using this
product. Do not wear pants with cuffs, shirts with open pockets, or any clothing that
can catch and hold molten metal or sparks. Keep clothing free of grease, oil, solvents,
or any flammable substances. Wear dry, insulating gloves and protective clothing.
Wear an approved head covering to protect the head and neck. Use aprons, cape,
sleeves, shoulder covers, and bibs designed and approved for welding and cutting
procedures. When welding or cutting overhead or in confined spaces, wear flame
resistant ear plugs or ear muffs to keep sparks out of ears.
4. Prevent accidental fires. Remove any combustible material from the work area.
When possible, move the work to a location well away from combustible materials.
If relocation is not possible, protect the combustibles with a cover made of fire
resistant material. Remove or make safe all combustible materials for a radius of
35 feet (10 meters) around the work area. Use a fire resistant material to cover or
block all open doorways, windows, cracks, and other openings. Enclose the work
area with portable fire resistant screens. Protect combustible walls, ceilings, floors,
etc., from sparks and heat with fire resistant covers. If working on a metal wall,
ceiling, etc., prevent ignition of combustibles on the other side by moving the
combustibles to a safe location. If relocation of combustibles is not possible, designate
someone to serve as a fire watch, equipped with a fire extinguisher, during the
welding process and for at least one half hour after the welding is completed. Do
not weld or cut on materials having a combustible coating or combustible internal
structure, as in walls or ceilings, without an approved method for eliminating the
hazard. Do not dispose of hot slag in containers holding combustible materials.
Keep a fire extinguisher nearby and know how to use it. After welding or cutting,
make a thorough examination for evidence of fire. Be aware that easily visible
smoke or flame may not be present for some time after the fire has started. Do not
weld or cut in atmospheres containing dangerously reactive or flammable gases,
vapors, liquids, and dust. Provide adequate ventilation in work areas to prevent
accumulation of flammable gases, vapors, and dust. Do not apply heat to a container
that has held an unknown substance or a combustible material whose contents,
when heated, can produce flammable or explosive vapors. Clean and purge
containers before applying heat. Vent closed containers, including castings, before
preheating, welding, or cutting.