Unpacking
When unpacking, check to make sure the following parts are included.
Concrete Wall Chaser with Two Blades and Spacers Steel Chisel Point
Two Point Spanner Wrench
Side Mount Auxiliary Handle
5mm Hex Key
When unpacking, check to make sure that all listed accessories are included, and that the product is intact and undamaged.
WARNING! People with pacemakers should consult their physician(s) before using this product. Opera-
tion of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.
Installing and Adjusting Blades and Spacers
1.Be sure the tool is turned OFF and is unplugged from its power source before installing or adjusting blades.
NOTE: The blades can be spaced from .3” to 1” (8 to 26 mm) apart for various width grooves in the work material, as desired.
2. Remove the Blade Guard Assembly (59) and | Depth Adjuster Handle (60) removed | |
Height Adjuster (58) by removing Screws (63 and | ||
| ||
64) and Depth Adjuster Handle (60). Put these |
| |
parts in a safe place to prevent their loss. Swing |
| |
the Height Adjuster (58) down clear of the blade |
| |
and remove it. |
|
Height Adjuster (58)
Screws (63 and 64)
Blade Guard Assembly (59)
Tool shown with Blade Guard Assembly (59) removed.
SKU 93009 | For technical questions, please call | Page 7 |
