20
afk / wi face kit installation
1.Attach screw and spacer as illustrated in Fig. 46 to the bottom of both sides of the front housing.
SCREW |
& |
SPACER |
figure 46 |
2.Attach the face plate bracket provided to the top edge of the front housing using 2 #8 - 1/2” truss head screws as illustrated in Fig. 47.
figure 47 |
figure 48 |
3.Lift and hook the faceplate over the spacers. Then push the top of the faceplate back until it comes in contact with the face plate bracket, then secure on the underside by using the 2
figure 49 |
NOTE: A 1/4” gap must be maintained between the front and all finishing material due to regular removal.
