17
FINISHING
door REMOVAL
Before the glass door can be removed, the optional front must be removed.
The glass door is secured to the top front edge of the firebox. Pull the handles of the latches forward, then lift the hooks out from the slots in the door frame to release the top of the door. Next, pivot forward until the top edge of the door clears the front of the fireplace. Next gripping the sides of the door lift the door out from the retainer along the bottom of the door.
figure 34
Log SHIPPING BRACKET
figure 35
Latches
|
| LOG SHIPPING |
|
| BRACKET |
| Glass Door | Before installing the logs, you must first remove the log ship- |
Optional Front | Retainer | ping brackets. Lift up to remove. |
Decorative brick panels must be installed before the logs.
See installation instructions supplied with the panel kit.
Log Placement
phazertm logs, exclusive to Napoleon Fireplaces, provide a unique and realistic glowing effect that is different in every installation.
4.Place log #4 with the charred branch facing
inward. Position the pin |
figure 36 a-F
1. Place the rear log #1 onto the locating studs along the back edge of the PHAZERAMIC™ burner.
2. Position log #2 in the
2 locating holes behind the andirons.
3.Place log #3, with the charred branch fac-
1
2
in log #4 into the hole | 4 |
| |
on the right of log #2. |
|
5.Place log #5 so the locating hole on the botttom of the log sits on the screw and
spacer.5
6.Finally, align the rectangular peg on log #6 with the notch on the front right portion
ing inward. Position the | 3 |
pin in log #3 into the hole on the left of the log #2.
GLOWING EMBERS
Glowing embers are NOT recommended. The burner has been designed to achieve maximum glow without embers.
