INSPECTION, MAINTENANCE,
AND CLEANING
WARNING! Lock the Trigger by mov- ing the Trigger Lock to the right and unplug the tool before per- forming any service, maintenance, or cleaning of the Stapler/Nailer. All maintenance, service, or re- pairs not mentioned in this manual must only be performed by a quali- fied service technician.
1.Before each use, inspect the general condition of the Stapler/Nailer. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, jammed Staples/Nails, damaged Power Cord/Plug, and any other condition that may affect the safe operation of the Tool. If abnor- mal noise or vibration occurs, have the problem corrected before further use.
Do not use damaged equipment.
2.To clean, wipe with a damp cloth, using a mild detergent. Never use solvents such as thinner, alcohol, trichloroethylene, etc. to clean the Stapler/Nailer.
3.Always empty the Stapler/Nailer of its Staples/Nails and store the tool in a clean, dry, safe location out of reach of children and other unauthorized people.
Clearing Jams
1.Lock the Trigger by moving the Trigger Lock to the right and un- plug the tool before clearing jams.
2.Push the Magazine Lock upward to its “OPEN” position. Pull the Outer Staple Slot slightly backward before pulling it down. (See Figure H.)
3.Use pliers to take out the jammed Staple/Nail. Then pull the Outer Staple Slot up to its original position, and push the Magazine Lock down- ward to its “CLOSED” position to lock the Outer Staple Slot in place. (See
Figure H.)
SKU 93749 | For technical questions, please call | Page 9 |
