Specifications
Electrical Requirements | 120 V~ / 60 Hz | |
|
| |
Material | ABS plastic frame | |
Glass lens | ||
| ||
Magnification | 3 D + 12 D | |
|
| |
Bulb Type | 4T 12W Energy Saving | |
Compact Fluorescent Lamp | ||
| ||
Cord Length | 4’ - 9” | |
|
| |
Height | 20” | |
|
| |
Base Dimensions | ||
|
|
E224011
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Operation
Read the entire Important Safeguards section at the beginning of this manual including all text under subheadings therein before set up or use of this Lamp.
1.Plug the power cord into the nearest two or three prong outlet.
Power
Switch
Figure A
2.Turn on the Lamp by pushing down on the black Power Switch (12) found at the back of the Lamp’s base. See Figure A, above.
Lens Adjusting
Lens 
Cover Knob
Frame
Lens
Figure B
3.To use the Lamp’s magnification set- tings, pull open the Lens Cover (3) from the Lens Frame (2). See Figure B, above.
4.Use the Adjusting Knob (9) to reach the desired angle.
5.After each use, shut the Lens Cover
(3) and remove the Power Cord (13) from the outlet.
SKU 97448 | For technical questions, please call | Page 4 |
