Specifications
| 120 V~ / 60 Hz / 450 Watts | |
| 5.5 Amps (Start Up) | |
Electrical | 3.3 Amps (Load & No Load) | |
Requirements | Motor Speed: 30,000 RPM | |
| Power Plug: | |
| Power Switch: ON/OFF Rocker | |
Spray Cup Capacity | 1 Quart | |
|
| |
Output Pressure | 1.45 to 4.35 PSI | |
|
| |
Activation Method | Trigger Style | |
|
| |
Fluid Control Knob | Clockwise (For round pattern) | |
Counterclockwise (For flat pattern) | ||
| ||
Air Control | Adjustable Lever | |
|
| |
Adjustable Spray | Horizontal (2.0” H x | |
Vertical | ||
Patterns | ||
Round | ||
| ||
Product Limitations | Not recommended for use with latex | |
and other | ||
| ||
| Polypropylene Housing | |
| Rubber/Thermoplastic Hose | |
| Brass Needle & Knob | |
Construction Materials | Aluminum Paint Cup & Nozzle |
To prevent serious injury
from accidental operation:
Turn the Power Switch (33) of the Paint Sprayer to its “OFF” position and unplug the tool from its electrical outlet before assembling, operating, or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
FLUID CONTROL SCREW
(19)
Sheet Steel Trigger |
Polyester Shoulder Strap |
Die Cast Aluminum Spray Gun |
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon
POWER SWITCH
(33)
AIR CONTROL LEVER
(13)
TRIGGER
(6)
AIR
NOZZLE
(4)
CUP (27)
as possible.
PRODUCT FEATURES
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
FIGURE A
AIR HOSE
(31)
MOTOR
(32)
PREPARATION
1.IMPORTANT: Due to the viscosity of latex and other
SKU 97750 | For technical questions, please call | Page 8 |
