Save these instructions, Service precautions

that it is in good working order. Faulty appliances or power cords can create a potential for electrical shock.

2.If an appliance begins to operate abnormally, becomes sluggish or stops suddenly, turn it off immediately. Disconnect the appliance, and determine whether the problem is the appliance, or if the rated load capacity of the generator has been exceeded.

3.Make sure that the electrical rating of the tool or appliance does not exceed that of the generator. Never exceed the maximum power rating of the generator. Power levels between rated and maximum may be used for no more than 30 minutes.

4.Substantial overloading will open the circuit breaker. Exceeding the time limit for maximum power operation or slightly overloading the generator may not switch the circuit breaker or circuit protector OFF, but will shorten the service life of the generator.

Service precautions

1.Before service, maintenance, or cleaning:

a.Turn the engine switch to its “OFF” position.

b.Allow the engine to completely cool.

c.Then, remove the spark plug wire(s) from the spark plug(s).

2.Keep all safety guards in place and in proper working order. Safety guards include muffler, air cleaner, mechanical guards, and heat shields, among other guards.

3.Do not alter or adjust any part of the equipment or its engine that is sealed by the manufacturer or distributor.

Only a qualified service technician

may adjust parts that may increase or decrease governed engine speed.

4.Wear ANSI-approved safety goggles, heavy-duty work gloves, and dust mask/ respirator during service.

5.Maintain labels and nameplates on the equipment. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

6.Have the equipment serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the equipment is maintained. Do not attempt any service or maintenance procedures not explained in this manual or any procedures that you are uncertain about your ability to perform safely or correctly.

7.Store equipment out of the reach of children.

8.Follow scheduled engine and equipment maintenance.

9.Refueling Precautions:

a.Do not smoke, or allow sparks, flames, or other sources of ignition around the equipment, especially when refuelling.

b.Do not refill the fuel tank while the engine is running or hot.

c.Do not fill fuel tank to the top. Leave a little room for the fuel to expand as needed.

d.Refuel in a well-ventilated area only.