12.Do not cover the engine or equipment during operation.
13.Keep the equipment, engine, and surrounding area clean at all times.
14.Use the equipment, accessories, etc., in accordance with these instructions and in the manner intended for the particular type of equipment, taking into account the working conditions and the work to be performed. Use of the equipment for operations different from those intended could result in a hazardous situation.
15.Do not operate the equipment with known leaks in the engine’s fuel system.
16.This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5, et seq.)
17.When spills of fuel or oil occur, they must be cleaned up immediately. Dispose
of fluids and cleaning materials as per any local, state, or federal codes and regulations. Store oil rags in a bottom- ventilated, covered, metal container.
18.Keep hands and feet away from moving parts. Do not reach over or across equipment while operating.
19.Before use, check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the equipment’s operation.
If damaged, have the equipment serviced before using. Many accidents are caused by poorly maintained equipment.
20.Use the correct equipment for the application. Do not modify the equipment and do not use the equipment for a purpose for which it is not intended.
21.CAUTION: This generator is not intended to power sensitive electronic
equipment* without the addition of an appropriate line conditioner and surge protector (both not included). Sensitive electronic equipment should be operated on approved inverter type generators or pure sine wave generators.
If the plugged in product operates abnormally or unusually slow, immediately stop using the generator as a power source. Always read and adhere to the instruction manual of the product to be powered, to make sure that it can be safely and efficiently powered by a portable generator.
Note: When using a generator to provide home standby electricity, a transfer switch (sold separately) is needed to prevent back feeding power into the utility line.
Connections for standby power to a building electrical system must be made by a qualified electrician. The connection must isolate the generator power from utility power, and must comply with all applicable laws and electrical codes.
WARNING: Improper connections to a building electrical system can allow electrical current from the generator to backfeed into the utility lines. Such backfeed may electrocute utility company workers or others who contact the
lines during a power outage, and the generator may explode, burn, or cause fires when utility power is restored. Consult the utility company or a qualified electrician.
*Sensitive electronic equipment includes, but is not limited to, audio/ video equipment, some television sets, computers, and printers.
AC APPLICATIONS
1.Before connecting an appliance or power cord to the generator: Make sure
SKU 98706 | For technical questions, please call | Page 5 |
