Chicago Electric 98759 Maintenance Servicing, Cleaning, Maintenance, Lubrication

Maintenance And

Servicing

Procedures not specifically explained in this manual must be performed only by a qualified technician.

To prevent serious injury

from accidental operation:

Turn the Power Switch of the ARC welder to its “OFF” position and unplug the tool from the electrode clamp before performing any inspection, maintenance, or cleaning procedures.

To prevent serious injury from tool failure:

Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.

Cleaning, Maintenance, and

Lubrication

1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wir­ ing, and any other condition that may affect its safe operation.

2.After Use, clean external surfaces of the tool with clean cloth.

3.WARNING! If the supply cord of this power tool is damaged, it must

be replaced only by a qualified service technician.

PLEASE READ THE FOLLOWING

CAREFULLY

The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as

a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.

SKU 98759 For technical questions, please call 1-800-444-3353. Page 9