Insert the bolts.
5. If the machine is to be moved a distance location,
replace the vibration mounting locks which were re-
moved during installation as shown below.
1. Turn of the water and electricity supply af-
ter every wash. Open the door to prevent the
formation of moisture and odors. If the wash-
ing machine is left idle for a long period, drain
any remaining water in the machine and re-
place the drainage hose.
2. Unplug the machine during cleaning and
maintenance. Use a soft cloth dampened
with soapy liquid to clean the machine case
and rubber components. Do not use corro-
sive or abrasive chemicals or solvents.
6. If the washing machine is left
idle for a long period turn off the
water and electricity supply and
open the door slightly to prevent
the formation of moisture and
odors.
Remove the back
cover.
Replace the rubber
plugs.
4. Toprevent blockages to the water
supply or the ingress of contaminants,
clean the water inlet and inlet water
filter regularly.
Replace the back
cover.
Tighten the bolts with a
spanner.
Maintenance
13
4.