17.Use proper size and type extension cord. If an extension cord is required, it must be of the proper size and type to supply the correct current to the tool without heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the tool. This tool re- quires use of an extension cord of 20 amps capability (up to 50 feet), with wire size rated at 12 AWG. Longer extension cords require larger size wire. If you are using the tool outdoors, use an extension cord rated for outdoor use (signified by “WA” on the jacket).
18.Maintenance. For your safety, maintenance should be performed regularly by a qualified tech- nician.
19.This product, when used for welding and similar applications, produces chemicals known to the State of California to cause cancer and birth defects (or other reproductive harm). (California Health & Safety Code § 25249.5, et seq.)
20.The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be sup- plied by the operator.
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Assembly
This step should only be performed by a licensed electrician. Acquire an appropriate 220 V~,
See the wiring diagram on page 8. | Figure 1 |
|
Light
Annealing Button
Pressure Knob
Left Electrode
Power Cord Left Hand Clamp
Welding Button
Right Electrode
Right Hand Clamp
Light Switch
REV 04e, 04f, 07k
SKU 3663 | For technical questions, please call | Page 4 |
