Installation Instructions | RPAA1, B1, C1 |
Security | RPAA1 |
Mount | Outer |
Drawer | Sleeve |
| Projector |
5.Adjust projector to desired roll.
6.Tighten adjustment screws.
Yaw
The yaw was adjusted when the RPAA1 was attached to the pipe. If the yaw needs to be adjusted further, follow Steps
Locking the RPAA1
After all installation and adjustment steps have been completed, lock the RPAA1. (See Figure 11)
Figure 9
Aligning Projector
The RPAA1 can be adjusted for vertical elevation (pitch), horizontal tilt (roll), and rotation (yaw).
RPAA1 Lock
Figure 11
Roll | Pitch | |
Adjustment | ||
Adjustment | ||
Screws | ||
Screw | ||
|
Figure 10
Pitch
Adjust pitch using the adjustment screw on the end of the adjustment plate. (See Figure 10)
1.Loosen the adjustment screw.
2.Adjust projector angle to desired pitch.
3.Tighten adjustment screw.
Roll
Adjust roll using the two adjustment screws on the back of the adjustment plate. (See Figure 10)
4.Loosen the two adjustment screws.
7