![](/images/new-backgrounds/1008834/88341x1.webp)
I N S T A L L A T I O N I N S T R U C T I O N S
MEDIUM FLAT PANEL DISPLAY STATIC MOUNT
MSR Series
The MSR Series static mount accommodates medium flat panel displays weighing up to 125 lbs (57 kgs).
The teardrop holes in the mount allow for quick connect/disconnect of the display, thus simplifying installation and maintenance processes.
The top and bottom mounting brackets are adaptable to single wood stud mounting or dual wood studs that are 16” on center.
After installing the display on the mount, the screen can be locked in place using the convenient locking flag.
A padlock can be used on the latching flag for added security.
The mount is concealed behind the display, making it a low profile wall mount.
MSR Series
!IMPORTANT: If the installation of this product requires OSHPD seismic approval, refer to OSHPD
BEFORE YOU BEGIN
CAUTION: To prevent damage to your monitor and MSR, which could affect or void the Factory warranty, thoroughly study all instructions and illustrations before you begin to install the mount. Pay particular attention to the Warnings and Cautions in this document.
The mount is designed to be installed using wall studs or supporting framework. The fasteners used to anchor the mount must be capable of supporting five times the total weight of the equipment.
The maximum weight to be installed on the MSR Series static wall mount is 125 lbs (57 kg).
If you have any questions about this installation, contact Chief Manufacturing at
CHIEF MANUFACTURING INC. | |
©2007 Chief Manufacturing | |
8401 EAGLE CREEK PARKWAY, STE. 700 | www.chiefmfg.com |
SAVAGE, MINNESOTA 55378 USA | 10/07 |
|
|
|
|