Chief Manufacturing MWC Series installation instructions Installation I N S T R U C T I O N S

I N S T A L L A T I O N I N S T R U C T I O N S

MEDIUM FLAT PANEL TILT WALL MOUNT WITH INTEGRATED CPU

Model: MWC Series

Specifications:

•Accommodates three installation options:

- Dual Wood Stud (16" on-center; requires 5/16" x 2-1/2" long hex head lag screws - included)

- Dual Steel Stud (requires Chief PAC-115 Steel Stud / Drywall Anchor Kit - not included) - Drywall (1/2" minimum; requires Chief PAC- 115 Steel Stud / Drywall Anchor Kit - not included)

• Accommodates CPU up to approximately 18-3/4" x 3-3/4"; see "DIMENSIONS" for specific details.

• Infinite display tilt adjustment between 0-15° with positive stops at 0°, 5°, 10°, and 15°.

• Weight capacity of 100 lbs (45 kg).

NOTE: Requires display interface providing 200x200mm mounting button pattern; not included.

BEFORE YOU BEGIN

WARNING: It is the installer’s responsibility to make sure all components are properly assembled and installed using the instructions provided. Failure to read, thoroughly understand, and follow all instructions can result in serious personal injury, damage to equipment, or voiding of factory warranty.

•If you have any questions about this these instructions or your specific installation, contact Chief Manufacturing at 1-800-582-6480 or 952-894-6280.

CHIEF MANUFACTURING INC.	8804-000296 RevB
1-800-582-6480952-894-6280 FAX 952-894-6918	￿2007 Chief Manufacturing
8401 EAGLE CREEK PARKWAY, STE 700	www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA	10/07