Chief Manufacturing PL-1 installation instructions Projector

I N S T A L L A T I O N I N S T R U C T I O N S

Projector

Lock (PL-1)

The PL-1 projector lock, constructed with heavy gauge steel, is designed to prevent access to projector mounts. The projector lock protects against disconnecting projectors from their mounts in most high-risk environments, minimizing the probabilities theft.

The design of the PL-1 ensures proper ventilation for

your projector while providing excellent security andPL-1protection.

BEFORE YOU BEGIN

•CAUTION: To prevent damage to your display, which could affect or void the Factory warranty, thoroughly study all instructions and illustrations before you begin to install the mount brackets. Pay particular attention to the “Important Warnings and Cautions” on Page 2.

•If you have any questions about this installation, contact Chief Manufacturing.

Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.

Chief Manufacturing, a division of Milestone AV Technologies	8803-000065 Rev C
8401 Eagle Creek Parkway, Savage, MN 55378	©2008 Milestone AV Technologies
P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918	05/08