Chief Manufacturing Assembly And Installation, Install Mounting Buttons, Model PSH-2000

Model: PSH-2000 Installation Instructions

ASSEMBLY AND INSTALLATION

NOTE: Read the Warnings and Cautions on page 2.

INSTALL MOUNTING BUTTONS

Installation of the mounting buttons is dependent on your specific display. Three options are provided:

•Akira 84" and Orion 84" displays

•Modular 84" displays

•Other large flat panel displays

AKIRA 84" AND ORION 84" DISPLAYS

1.Using key (140), insert screw (80) through button (90) and install into threaded mounting hole on back of display (See Figure 2). Tighten securely.

2.Repeat for remaining five buttons.

(90)	Mounting Hole
(80)
Install buttons (90) at these
6 mounting hole locations.

Figure 2: Akira 84" and Orion 84" Mounting Button

MODULAR 84" DISPLAYS

NOTE: Modular displays are four independent displays attached together within a single frame. The assembly performs as a single display.

1.Insert screw (80) through button (90) and frame on back of modular display (See Figure 3)(See Figure 4). Using key (140) and 13mm wrench, install washer (100), washer (110), and nut (120). Tighten securely.

2.Repeat for remaining five buttons.

Install buttons (90) at these 6 mounting hole locations.

Figure 3: Modular Display Frame

	(90)
(80)	(120)
	(110)
	(100)
	Modular
	Frame

Figure 4: Modular 84" Mounting Button

OTHER LARGE FLAT PANEL DISPLAYS

1.Install the optional interface bracket to display according to the instructions provided with the interface bracket.

NOTE: Mounting buttons are pre-installed on optional interface bracket. PSH-2000 items (80) through (120), and key (140)(See Figure 1), will not be used with optional interface bracket.

4