Model: | Installation Instructions |
|
|
INSTALL DISPLAY
WARNING: Display is very heavy! Ensure display can be safely lifted and maneuvered as required to install on mount. Failure to take adequate precautions can result in serious personal injury or damage to equipment!
1.Ensure latches (40) are in fully open (raised) positions (See Figure 6).
2.Note button openings to be used on each bracket (20) when installing display (See Figure 14).
Six | Four | |
Button |
| Button |
| ||
Installation | Installation |
(20)
Figure 14: Mounting Holes
3.Lift and maneuver display such that all buttons (90) fit into button openings on brackets (20). Lower display firmly into place. Ensure each button (90) has fully seated in its button opening.
4.Using Phillips screwdriver, tighten screw (70) until latch (40) slides into closed position (See Figure 15).
(70)
(40)
Figure 15: Closed Latch
5.Repeat for second latch (40).
6.Connect cables to display as required.
REMOVE DISPLAY
WARNING: Display is very heavy! Ensure display can be safely lifted and maneuvered as required to remove from mount. Failure to take adequate precautions can result in serious personal injury or damage to equipment!
1.Disconnect all cables from display.
2.Using Phillips screwdriver, fully remove screw (70) from threaded hole in bracket (20) (See Figure 6).
3.
4.Repeat for second latch (40).
5.Lift and maneuver display mounting buttons (90) out of button openings.
8