Chief Manufacturing XSM, XTM installation instructions Attaching Interface Brackets to Display

XSM/XTM Series Installation Instructions

Attaching Interface Brackets to Display

1.Align the center of the bracket with center of screen. (See Figure 4)

NOTE: The diamond-shape hole in the bracket corresponds to the center of the mount.

Center of bracket

Figure 4

WARNING: IMPROPER INSTALLATION CAN LEAD TO DISPLAY FALLING CAUSING SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Using screws of improper size may damage your display. Properly sized screws will easily and completely thread into display mounting holes. If spacers are required, be sure to use longer screws of the same diameter.

2.Select correct screws, spacers (if necessary) and washers from the hardware bag (A-K) and attach brackets to back of screen. (See Figure 4)

Switching Interface Brackets (Optional)

If an installation situation makes adjusting the location of interface brackets necessary, there are several options.

1.The wall brackets may be adjusted side to side at the point of attachment. (See Figure 5)

2.The location of the left and right interface brackets may be switched, with the knobs on the XTM interface brackets facing the inside of the mount. (See Figure 5)

1

Knobs

2

Figure 5

8