| TURNING OFF THE PROJECTOR | ||||
1 | Press the POWER |
|
|
|
|
|
|
|
| ||
| the remote control, and a message "Power off?" appears on |
|
|
|
|
| the screen. |
|
|
|
|
2 | Press the POWER |
|
|
|
|
|
|
|
| ||
projector. The LAMP Indicator lights bright and READY |
|
|
|
| |
|
|
|
|
| |
| Indicator turns off. After projector is turned off, Cooling Fans |
|
|
|
|
| operate (for 90 seconds). During this "Cooling Down" period, |
|
|
|
|
| this appliance cannot be turned on. |
|
|
|
|
| The message disappears after 4 seconds. | ||||
|
| ||||
3 | When the projector has cooled down, READY Indicator lights | ||||
| GREEN again and you can turn projector on. After cooling | ||||
down completely, disconnect AC Power Cord.
TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN
PROJECTOR ON, WAIT AT LEAST 5 MINUTES
BEFORE TURNING IT OFF.
DO NOT DISCONNECT AC POWER CORD WHILE
COOLING FANS ARE RUNNING OR BEFORE READY
INDICATOR LIGHTS GREEN AGAIN. OTHERWISE IT
WILL RESULT IN SHORTENING LAMP LIFE.
NOTE;
•The projector cannot be turned on during the cooling period with the READY indicator turned off. You can turn it on again after the READY indicator GREEN again.
•When the On start function is on, this projector is turned on automatically by connecting the AC power cord to an AC outlet.
•Do not operate the projector continuously without rest. Continuous use may result in shortening the lamp life. Turn off the projector and give it a rest about an hour in every 24 hours.
•This projector monitors internal temperature and automatically controls the running speed of the cooling fans.
•If the WARNING TEMP indicator flashes red, see “WARNING TEMP INDICATOR ” in the user’s manual.
English
- 15 -
