TERMINALS OF PROJECTOR
This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 12 to 14 and connect properly.
AUDIO INPUT 1 JACK
Connect an audio output (stereo) from computer to this jack.
INPUT TERMINAL (ANALOG)
Connect computer output (Analog HDB 15 pin type) to this terminal.
INPUT TERMINAL (DIGITAL)
Connect computer output (Digital
HD (HDCP Compatible) signal can also be connected.
AUDIO INPUT 2 JACK
Connect an audio output (stereo) from computer to this jack.
RESET BUTTON
This projector uses a micro processor to control this unit, and occasionally, this micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart unit. Do not use RESET function excessively.
INPUT 1
ANALOG |
|
|
| ||
|
|
|
|
| R/C JACK |
AUDIO 1 |
| RESET | CONTROL PORT | ||
|
|
| AUDIO 2 |
| |
G | B |
| R | H/V | V |
VIDEO/Y | Cb/Pb |
| Cr/Pr |
|
|
|
|
| INPUT 2 |
|
|
VIDEO/Y Cb/Pb Cr/Pr | |||||
| |||||
|
|
|
| (MONO) |
|
|
|
| INPUT 3 |
|
|
R/C JACK
When using Wired/Wireless Remote Control Unit as Wired Remote Control, Connect Wired Remote Control Unit to this jack with Remote Control Cable (not supplied).
CONTROL PORT CONNECTOR
When controlling the projector from a computer, connect the computer to this connector with a control cable.
English
5 BNC INPUT JACKS
Connect component video output (Y, Cb, Cr or Y, Pb, Pr) from video equipment to VIDEO/Y, Cb/Pb and Cr/Pr jacks or connect computer output {5 BNC Type (Green, Blue, Red, Horiz. Sync and Vert. Sync.)} from computer to G, B, R, H/V and V jacks.
VIDEO INPUT JACKS
Connect composite video output from video equipment to VIDEO/Y jack or connect component video outputs to VIDEO/Y, Cb/Pb and Cr/Pr jacks.
AUDIO INPUT JACKS |
| |
Connect an audio output |
| Connect |
from video equipment to |
| output from video |
these jacks. |
| equipment to this |
When the audio output is |
| jack. |
monaural, connect it to |
|
|
L (MONO) jack. |
|
|
- 7 -
