NAME OF EACH PART OF PROJECTOR
FRONT OF CABINET
| TOP CONTROLS |
PROJECTION LENS | AND INDICATORS |
(optional) |
|
CAUTION |
|
Do not turn on the projector with |
|
the lens cap attached. High |
|
temperature from light beam may |
|
damage the lens cap and result in |
|
fire hazard.
|
|
|
| AIR INTAKE |
|
|
|
| VENT |
LENS CAP |
|
|
| INFRARED |
(optional) | SPEAKERS | REMOTE RECEIVER | ||
BACK OF CABINET | POWER CORD |
| TERMINALS | INFRARED |
EXHAUST VENT | CONNECTOR | AND CONNECTORS | REMOTE RECEIVER | |
|
|
| ||
|
|
|
| |
HOT AIR EXHAUSTED !
Air blown from exhaust vent is hot. When using or installing a projector, following precautions should be taken.
● Do not put a flammable object near this vent. ● Keep rear grills at least 3.3’(1 m) away from any object, especially
● Do not touch this area, especially screws and metallic parts. This area will become hot while a projector is used.
This projector detects internal temperature
and automatically controls operating power LAMP COVER of Cooling Fans.
CARRYING
HANDLE
BOTTOM OF CABINET
AIR INTAKE VENTS
This projector is equipped with cooling fans for protection from overheating. Pay attention to following to ensure proper ventilation and avoid a possible risk of fire and malfunction.
●Do not cover vent slots.
● Keep side clear of any objects. Obstructions may block cooling air.
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
- 2 -
