Christie Digital Systems 38-VIV202-01 Setting/Appendix, Operating Wireless Mouse, Installation

Models: 38-VIV202-01

1 44
Download 44 pages 54.28 Kb
Page 37
Image 37

SETTING/APPENDIX

USB

This Projector is equipped with an USB port for interactive operation

between the projector and a computer. Set the mode following the USB steps below.

Wireless Mouse mode

Select " " when controlling a computer with the Remote Control of the projector.

Projector mode

Select " " when controlling the projector with a computer.

NOTE: Before you control the projector with a computer, install an USB driver (optionally sold part) and set up the computer fol- lowing the instruction in the USB driver package. Contact your authorized dealer.

Quit

Closes SETTING MENU.

Press the SELECT button at this icon to display previous items.

Move the pointer to the item and then press POINT LEFT/RIGHT button(s).

OPERATING WIRELESS MOUSE

Wireless Remote Control Unit is not only able to operate this projector but also usable as a wireless mouse for most Personal Computers. POINT buttons and two CLICK buttons are used for wireless mouse operation.

This Wireless Mouse function is available only when PC mouse pointer is displayed on a projected screen. When ON- SCREEN MENU or any message / dialog box is displayed on screen instead of PC mouse pointer, this Wireless Mouse function can not be used.

INSTALLATION

To use Wireless Remote Control Unit as Wireless Mouse for a Personal Computer, installation of the mouse driver (not supplied) is required. Make sure the mouse driver is properly installed in your computer. And make sure the mouse port (or USB port) of the Personal Computer is activated.

1

Connect the mouse port (or USB port) of your computer to the

Control Port (or USB connector) of this projector with a Control

 

Cable (or USB cable). (Refer to page 11, 12 for connection.)

2

Turn the projector on first, and then turn on your computer.

When the computer is switched on first, the Wireless Mouse may

not work properly.

Note : When your computer has no mouse port, connect Serial Port of your computer to the Control Port of the projector with the Control Cable for Serial Port (not supplied).

OPERATING WIRELESS MOUSE

When controlling a PC mouse pointer, operate Wireless Mouse with POINT button, SELECT button, and RIGHT CLICK button on Wireless Remote Control Unit.

POINT button

POINT button (Move pointer)

Used to move PC mouse pointer. The pointer is moved corresponding with the direction you are pressing.

SELECT (LEFT CLICK) button

This button has the same function as the left button in a PC mouse.

RIGHT CLICK button

This button has the same function as the right button in a PC mouse.

This button is not available for controlling this projector.

SELECT button

RIGHT CLICK button

(left mouse button)

(right mouse button)

 

 

37

Page 37
Image 37
Christie Digital Systems 38-VIV202-01 user manual Setting/Appendix, Operating Wireless Mouse, Installation