COMPUTER INPUT
SELECTING INPUT SOURCE
DIRECT OPERATION
Select the appropriate input signal by pressing the INPUT button on the Top control panel or on the Remote Control Unit.
If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below).
INPUT button
Input 1
Input 2
Input 3
| MENU OPERATION |
|
1 | Press MENU button and |
|
the POINT LEFT/RIGHT buttons to select Input and press |
| |
| SELECT button. Another dialog box INPUT SELECT Menu will | INPUT Menu icon |
| appear. | |
|
| |
2 | Press the POINT DOWN button and a |
|
appear. Move arrow to INPUT source that you want to select, |
|
and then press SELECT button.
SELECTING COMPUTER SYSTEM
WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )
1 | Press MENU button and | |
the POINT LEFT/RIGHT button to move the red frame pointer to | ||
| INPUT Menu icon. | |
2 | Press the POINT DOWN button to move the red arrow pointer to | |
Input 1 and then press SELECT button. Source Select Menu will | ||
| appear. | |
3 | Move the pointer to either Digital or Analog and then press | |
SELECT button. | ||
| When your computer is connected to COMPUTER | |
Digital | ||
|
| INPUT (DIGITAL) terminal, select RGB (Digital). |
|
| |
| When your computer is connected to COMPUTER INPUT | |
Analog | ||
|
| (ANALOG) terminal, select RGB (Analog). |
|
| |
INPUT MENU
INPUT Menu icon
Move the pointer (red arrow) to Input 1 and press SELECT button.
Input 1
Source Select Menu
Move the pointer to Digital or Analog and press SELECT button.
WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS )
When connecting a computer output [5 BNC Type (Green, Blue, Red, Horiz. Sync and Vert. Sync.)] from a computer to G, B, R, H/HV and V jacks.
1 | Press MENU button and |
the POINT LEFT/RIGHT button to move the red frame pointer to | |
| INPUT Menu icon. |
2 | Press the POINT DOWN button to move the red arrow pointer to |
Input 2 and then press SELECT button. Source Select Menu will | |
| appear. |
3 | Press the POINT DOWN button and a |
appear. Move arrow to "RGB", and then press SELECT button. |
INPUT MENU
INPUT Menu icon
Move the pointer (red arrow) to Input 2 and press SELECT button.
Input 2
Source Select Menu
Move the pointer to RGB and press SELECT button.
22
