Selecting Video System | Christie Digital Systems 38-VIV205-01

VIDEO INPUT

SELECTING VIDEO SYSTEM

1	Press MENU button and ON-SCREEN MENU will appear. Press
1	the POINT LEFT/RIGHT buttons to move the red frame pointer
	to AV SYSTEM Menu icon.
2	Press the POINT DOWN button to move the red arrow pointer to
2	system that you want to select and then press SELECT button.

VIDEO JACK OR S-VIDEO JACK

Auto

Projector automatically detects incoming Video system, and adjusts itself to optimize its performance.

When Video System is PAL-M or PAL-N, select system manually first.

PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N

If projector can not reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

AV SYSTEM MENU (VIDEO OR S-VIDEO)

AV SYSTEM Menu icon

This box indicates system being selected.

Move the pointer to system and press SELECT button.

Y, Pb/Cb, Pr/Cr JACKS

Auto

Projector automatically detects incoming Video signal, and adjusts itself to optimize its performance.

When Video System is 1035i or 1080i, select system manually first.

COMPONENT VIDEO SIGNAL FORMAT

If projector can not reproduce proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i and 1080i.

AV SYSTEM MENU (COMPONENT VIDEO)

AV SYSTEM Menu icon

This box indicates system being selected.

Move the pointer to system and press SELECT button.

31

Image 31

Christie Digital Systems 38-VIV205-01 Selecting Video System, Video Input, PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N

Contents

Model To the Owner Voor de klanten in Nederland Safety Instructions Federal Communication Commission Notice Compliances Table of Contents Compact Design Digital Zoom for Computer Features and Design Name of Each Part of Projector Preparation Connecting AC Power Cord SETTING-UP ProjectorFor U.S.A. and Canada For Continental Europe Lens Shift Adjustment Preparation Lens InstallationPositioning Projector Moving Projector Preparation Adjustable Feet Audio Input Jacks Connecting ProjectorUSB Connector Series B Terminals of Projector Terminals Projector Connecting to Computer Audio Video Connecting to Video Equipment Before Operation Operation of Remote ControlLaser Pointer Function Focus Button Volume ButtonWired Remote Jack Zoom Button Ready Indicator TOP Control Panel and Indicators Operating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Guide Window Before Operation Menu BARSound Menu Turning on Projector Turning on / OFF ProjectorTurning OFF Projector Keystone Adjustment Adjusting ScreenZoom Adjustment Focus Adjustment Sound Adjustment Input Menu Computer InputSelecting Input Source Selecting Computer System Auto PC AdjustmentAuto PC Adjustment Computer Input Automatic MULTI-SCAN System Computer Input Manual PC Adjustment Full screen Computer InputDisplay area Display area H 1024 x 48.363 60.004 Computer Input Compatible Computer SpecificationsResolution 640 x 31.469 59.940 Image 1~4 Picture Image AdjustmentImage Level Select Direct Image Level Select Menu Image Adjust Menu Computer Input Image Level Adjustment Screen Menu Picture Screen Adjustment Video Video Input PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N Component Video Signal FormatSelecting Video System Video Input Cinema Video Input Image Level Adjustment To function that you want to select and then press Select Setting Menu SettingSetting Menu To change code of Projector To change code of Remote Control UnitWireless Mouse mode Projector mode Operating Wireless Mouse SETTING/APPENDIXOperating Wireless Mouse Installation AIR Filter Care and Cleaning MaintenanceCleaning Projection Lens Lamp Replace Counter Appendix Lamp Replacement Troubleshooting Service Technical Specifications USB Connector Series B Appendix Configurations of Terminals Part No -A 610 302 1256 1AA6P1P3605-- MB8KM