Christie Digital Systems 38-VIV207-01 user manual Connecting Projector, Terminals Of Projector

Models: 38-VIV207-01

1 48
Download 48 pages 3.53 Kb
Page 11
Image 11
CONNECTING PROJECTOR

CONNECTING PROJECTOR

TERMINALS OF PROJECTOR

This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 11 to 13 and connect properly.

COMPUTER INPUT 2 (DIGITAL/ANALOG) Media Card Imager / Wireless Imager

TERMINAL

Connect computer output (Digital / Analog DVI-I type),

Media Card Imager*, or Wireless Imager* to this terminal. (Refer to P12)

*optional accessories

MONITOR OUTPUT

 

COMPUTER INPUT 1

 

COMPUTER AUDIO

TERMINAL

 

TERMINAL

 

INPUT (1 and 2) JACKS

Connect a monitor to

 

Connect computer output

Connect an audio output

this terminal.

 

(Analog HDB 15-pin type) or

(stereo) from computer to

This terminal outputs a

 

21-pin Scart (RGB) output

these jacks.

computer input signal

 

from video equipment to this

(Refer to P12.)

(except Digital signal

 

terminal. (Refer to P12, 13.)

 

input on DVI terminal).

 

 

 

 

(Refer to P12.)

 

 

 

 

AUDIO OUTPUT JACK

Connect an external audio amplifier to this jack.

(Refer to P12, 13.)

Do not press this button. This button is used for our optional accessories.

COMPUTER IN 1

AUDIO IN 1

 

COMPUTER IN 2

 

DVI - I

 

AUDIO IN 2

RESET

 

 

CONTROL PORT

AUDIO OUT

 

MONITOR OUT

 

R – AUDIO IN – L (MONO) VIDEO

S – VIDEO

 

MCI / WI

 

Y – Pb / Cb – Pr / Cr

USB

RESET BUTTON

This projector uses a micro processor to control this unit, and occasionally, this micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart the unit. Do not use RESET function excessively.

CONTROL PORT CONNECTOR

When controlling the computer with Remote Control Unit of this projector, connect the mouse port of your personal computer to this connector. (Refer to P12.)

S-VIDEO INPUT JACK

Connect the S-VIDEO output from video equipment to this jack. (Refer to P13.)

AUDIO INPUT JACKS

Connect the audio output from video equipment to these jacks.

(Refer to P13.)

When the audio output is monaural, connect it to L (MONO) jack.

VIDEO INPUT JACKS

 

VIDEO INPUT JACK

 

USB CONNECTOR (Series B)

Connect the

component

 

Connect the composite

When controlling the computer

video output

from video

 

video output from video

with Remote Control Unit of this

equipment to connect the

 

equipment to connect

projector, connect USB port of

component video outputs to

 

this jack.

your personal computer to this

Y, Pb/Cb and Pr/Cr jacks.

 

(Refer to P13.)

connector. (Refer to P12.)

(Refer to P13.)

 

 

 

 

 

11

Page 11
Image 11
Christie Digital Systems 38-VIV207-01 user manual Connecting Projector, Terminals Of Projector