2
CHRISTIE DIGITAL SYSTEMS P35GPS Projector
March, 2004
2-1
2. GENERAL DESCRIPTION The CHRISTIE P35GPS Projector, manufactured exclusively by CHRISTIE DIGITAL
SYSTEMS in Cypress, California, is a dual-lens 35mm movie projector that employs a
revolutionary sealed-bearing intermittent movement called the Ultramittent©. This
movement coupled with uncompromising design and assembly workmanship, results in the
finest possible theater picture reproduction. The Ultramittent movement is standard on all
CHRISTIE projectors.
2.1. OPTIONAL FEATURES
Options available for enhancing the standard features of the P35GPS projector include:
• manual dual-lens turret
• automatic dual or triple lens turret, including automatic aperture changer
• inboard Dolby digital reader
• all models available in 50 Hz or 60 Hz
2.2. SPECIFICATIONS
Standard specifications for the P35GPS projector family are listed in the Table shown in
Figure 2-1, below.
POWER REQUIREMENTS:
Input Voltage 115 VAC, 5 Amp, 60 Hz
OR 220 VAC, 3 Amp, 50 Hz
DIMENSIONS:
Height 23 inches
Width 18 inches
Depth 16 inches
WEIGHT: Standard: approximately 90 lb.
FILM SPEED: Standard: 24 frames/sec (90 ft/min)
OPERATING TEMPERATURE: 0 to +45°C
MOTOR: Synchronous split phase, 1800 rpm, 60 Hz
OR 1500 rpm, 50 Hz
Figure 2-1: Table of Equipment Specifications
These specifications may vary slightly, depending upon the particular model and options
chosen.