Chromalox PD411-10 installation instructions General, Chromalox, Renewal Parts Identification

Chromalox®

Installation, Operation, Maintenance Instructions

and

RENEWAL PARTS IDENTIFICATION

SERVICE REFERENCE

DIVISION 4		SECTION TL
SALES	(Supersedes PD411-9)		PD411-10
REFERENCE
	161-048529-001

DATE AUGUST, 2008

Incorporates PD410-8 and PD413-6. These manuals have been discontinued.

Type TLC, TLO, TLS, TLI, KTLC, KTLO, KTLS, KTLI, KBLC, KBLS, BLCK, & BLCS Series Industrial Over-The-Side Immersion Heaters

Type KTLC Type TLC Type KBLS

Shown above are Moisture Resistant Terminal Enclosures. Explosion Resistant Terminal Enclosure not shown.

Note: Consult factory for specific installation instructions for heaters with additional features not detailed in this installation guide.

Such additional features may include thermocouples supplied as a special order modification.

GENERAL

Safety Guidelines

The safety and performance of this heater is dependent on proper handling, installation, control and maintenance. As Chromalox can not anticipate all conditions under which this information and heater, or this heater in combination with other manufacturer’s products may be used, it is advised that you conduct your own tests to determine the safety and suitability of this heater in combination with other products in your application. Where the consequences of overheating or failure could result in personal injury or property damage, back-up controls and safety devices are essential.

The Safety Alert Symbol: is found throughout these installa- tion instructions to identify potential hazards that can result in person- al injury. The seriousness of the potential risk is identified by one of these three words:

– will result in serious injury or death.

WARNING – could result in serious injury or death.

– may result in minor or moderate injury.

Read and follow these instructions to minimize risks of electric shock or fire. Save these instructions for future reference.

Chromalox Type TLC, TLO,TLS,TLI, KTLC, KTLO, KTLS, KTLI, KBLC, KBLS, BLCK, & BLCS series industrial Over-The- Side immersion heaters are designed for a wide variety of heating applications.

1.Heater Construction Characteristics

A.High quality resistance wire held in place by compacted Magnesium Oxide Refractory or compacted proprietary cement enclosed in a wide variety of sheath materials.

B.Low to high watt densities.

C.Standard selection of sheath materials include copper, steel, INCOLOY® alloy and stainless steel. This broad selection of sheath materials will operate successfully in many corrosive solutions.

© 2010 Chromalox, Inc.