MAINTENANCE
ELECTRIC SHOCK HAZARD. Disconnect all power before installing or servicing heater. Failure to do so could result in personal injury or property damage.
1.Heaters should be checked periodically for coatings and corrosion and cleaned if necessary.
2.The tank should be checked regularly for sediment around the heater as sediment can act as an insulator and shorten heater life. Note: Applies to all items, not just #2.
Note: User is responsible for maintenance schedule based on their knowledge of the heated medium and operating conditions.
3.Remove any accumulated sludge deposits from heater and from tank.
4.Check for loose terminal connections.
5.If corrosion is indicated in the terminal enclosure, check termi- nal enclosure gasket and replace if necessary. Check conduit layout to correct conditions that allow corrosion to enter the ter- minal enclosure.
6.Clean terminal ends of all contamination.
RENEWAL PARTS
1. Thermostat Kit (order by PCN):
A.
2. Thermostat Knob:
A.
3. Sludge Legs:
A. TLC, KTLC
4 Post Terminal
3 Post Terminal
Thermostat Mounting
4. Thermostat
A.
B.
C.
E.
F.
Limited Warranty:
Please refer to the Chromalox limited warranty applicable to this product at
2150 N. RULON WHITE BLVD., OGDEN, UT 84404 | TA | |
Phone: | www.chromalox.com |
Litho in U.S.A.