Chrysler 2005 Town and Country manual Memory Position Recall

134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

5.Turn on the radio and set the radio station presets (up to 10 AM and 10 FM stations can be set).

6.Turn the ignition switch to the OFF position and remove the key.

7.Press and release the SET (S) button located on the driver’s door. A chime will sound signaling that you are in the memory set mode.

8.Within 5 seconds, press and release memory button 1 or 2 on the driver’s door. A chime will sound signaling to you that the driver memory has been set. The next step must be performed within 5 seconds if you desire to also use a Remote Keyless Entry transmitter to recall memory positions.

9.Press and release the LOCK button on one of the transmitters. A chime will sound signaling to you that the transmitter has been successfully linked to memory.

10.Insert the ignition key and turn the ignition switch to the ON position.

11.Select Remote Linked to Memory in the Electronic Vehicle Information Center (EVIC) and enter Yes or select Use Factory Settings from the EVIC and enter Yes. Refer to the Customer Programmable features in the Electronic Vehicle Information Center (EVIC) section for more information.

12.Repeat the above steps to set the next memory position using the other numbered memory button or to link another Remote Keyless Entry transmitter to memory.

Memory Position Recall

NOTE: The vehicle must be in Park to recall memory positions. If a recall is attempted when the vehicle is not in Park, a message will be displayed in the Electronic Vehicle Information Center (EVIC).