S y s t e m s e t u p
DYNAMIC RANGE COMPRESSION
To avoid disturbing the neighbours at night, you can use this function to reduce the sound effects volume without changing the original tone.
HDCD
This function is used to select sampling frequency for HDCDs. However, the function is only active when playing HDCD format discs.
.. HDCD Setup Page ..
Filter | X1 | Off |
X1
X2
Filter
OFF: HDCDs will be played like normal audio CDs.
1X (44.1K) or 2X (88.2K): HDCDs will be played at a sampling frekquency of 44.1KHz or 88.2KHz if possible. (This setting depends on the contents of the disc).
VIDEO SETUP
SCART OUT
Here the desired video output is selected. However, note that component video output is not possible through the Scart output.
CVBS
RGB
Component
CVBS: Composite video output through the Scart output.
RGB: RGB output through the Scart output.
Component: Component video output through the component video outputs on the back panel. Note: This output may allow both Interlace Scan and Progressive Scan. You switch between IS and PS by means of the MODE key on the remote control.
PREFERENCE SETUP
This menu item includes TV type, audio language, subtitles, disc menu language, parental control and default settings.
TV TYPE
Here you select the TV system used in the country in which you live.
PAL: Europe
MULTI: This setting is often available in both places. If not, the unit must be set according to the TV system used.
NTSC:The USA
In the TV manual you can see which TV system is used.
AUDIO
Used to select the desired dubbing/audio language for the DVD film.
Note: This is only possible if the disc supports the audio language in question.
20
