Cingular Amzer Smart Keyboard manual 18

Registration

Registration Key

Now that the Amzer keyboard manager application is installed on the BlackBerry handset, driver needs to be registered before it will connect to the Professional Bluetooth keyboard.

Step 1:

Using the device trackwheel, move the cursor to the [Register] option.

Step 2:

Enter in the registration key code provided to you as shown in the figure on the right.

Step 3:

When the key code has been entered, move the cursor to the [OK] option and click enter.

Wait for a few seconds as Amzer will now connect to the keyboard. The status bar will change to “Keyboard connected”.

Once Amzer makes a connection, the keyboard is ready for use.

Note: the Bluetooth connection normally takes a few seconds to connect. Therefore when turning

On the keyboard there will be a delay before Amzer will display input from the keyboard. This is normal operation of Bluetooth connectivity.

Amzer→ Smart Keyboard, User Guide v3.00 © 2006 Page 18