Cisco Systems 1005 manual Specifications of the router are listed in Table

Specifications

Specifications

The specifications of the router are listed in Table 1-1.

Table 1-1	System Specifications
Description		Specification
Dimensions (H x W x D)		1.75 x 8.0 x 8.3" (4.4 x 20.3 x 21.1 cm)
Weight		2.6 lb (1.2 kg)
Input voltage, frequency,		12 VDC output, minimum 0.5A
and power dissipation		External power supply: 100–240 VAC at 50–60 Hz, 1.0A input
Memory		4-MB DRAM1 SIMM2
		1-MB boot PROM3
		8-KB NVRAM4
WAN interface		1 serial (DB-60)5
Ethernet interface		1 10BaseT (RJ-45)
PCMCIA slot		1 Type 2 (for Flash ROM card)
Console interface		1 asynchronous serial (EIA/TIA-2326) (RJ-45)
Operating environment		32–104°F (0–40°C)
Operating humidity		10–90%, noncondensing
Agency compliance		FCC Class B, VCCI Class 2, CISPR-22 Class B,
		EN 55022 Class B

1.DRAM = dynamic random-access memory.

2.SIMM = single in-line memory module.

3.PROM = programmable read-only memory.

4.NVRAM = nonvolatile random-access memory.

5.The serial port supports the following synchronous interfaces: EIA/TIA-232, EIA/TIA-449, V.35, X.21, and EIA-530. The serial port supports EIA/TIA-232 asynchronous interfaces.

6.EIA/TIA-232 and EIA/TIA-449 were known as recommended standards RS-232 and RS-449 before their acceptance as standards by the Electronic Industries Association (EIA) and Telecommunications Industry Association (TIA).

1-4Cisco 1005 User Guide