Cisco Systems 10720, 12000 Starting Cisco EMF and Cisco 12000/10720 Router Manager

3-3

Cisco 12000/10700 v3.1.1 Router Manager User Guide

OL-4455-01

Chapter3 Getting Started

Starting CiscoEMF and Cisco 12000/10720 Router Manager

Starting Cisco EMF and Cisco 12000/10720 Router Manager

The Cisco 12000/10720 Router Manager application is viewed through the CiscoElement Management

Framework (CiscoEMF). It is important to understand how Cisco EMF works before you use the Cisco

12000/10720 Router Manager application (refer to the Cisco Element Management Framework User

Guide for further details). Cisco 12000/10720 Router Manager automatically starts when you start a

Cisco EMF user session.

Note Each active Cisco EMF session uses a single Cisco EMF user license.

This section covers the following:

•Starting a Cisco EMF User Session

•Launchpad

•Quitting a Cisco EMF User Session

Note Cisco EMF should already be running. When you try to invoke a CiscoEMF session, and

if you receive a message that CiscoEMF is not running, contact your system administrator,

or refer to the Cisco Element Management Framework User Guide for further details.

To start a Cisco EMF user session, proceed as follows:

Step1 From the command line on the terminal window, enter <CEMF_ROOT>/bin/cemf session

Note <CEMF_ROOT> is the Cisco EMF installation root directory (for example,

/opt/CEMF).