2Installing Cisco ONS 15454 SONET/SDH FC_MR-4 Cards
78-16233-01
FC_MR-4 Card Description
example, eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye
hazard. Use of controls or adjustments, or performance of procedures other than those specified may
result in hazardous radiation exposure.
The FC_MR-4 (Fibre Channel 4-port) card uses pluggable Gigabit Interface Converters (GBICs) totransport non-SONET/SDH-framed, block-coded protocols overSONET/SDH in virtually concatenatedor contiguously concatenated payloads. The FC_MR-4 can transport Fibre Channel over SONET/SDHusing Fibre-Channel client interfaces and allows transport of one of the following at a time:•Two contiguously concatenated (CCAT) STS-24c/VC4-8c circuits
•One STS-48c/VC4-16c CCAT
•Two virtually concatenated (VCAT) circuits (STC3c-8V/VC4-8v) compliant with ITU-T G.7041
GFP-T and Telcordia GR-253-CORE•One STS-24c/VC4-8c CCAT and one STS-24c/VC4-8c VCAT
In Software Release 4.6, only two of the four ports can be active at one time.Figure 0-1 shows the FC_MR-4 faceplate and block diagram.Figure 0-1 FC_MR-4 Faceplate and Block Diagram
FLASH SDRAM MPC8250
IBPIA
TADM
QDR MEMORY
SERDES
IBPIA
110595
BTC
192
CDR +
SONET
FRAMER
DDR
MEMORY
ELAN
VCAT
PROCESSOR
Decode and
Control
PLD
GBIC
OPTICS
GBIC
OPTICS
GBIC
OPTICS
GBIC
OPTICS
RUDRA
FPGA
1
Rx
Tx
2
Rx
Tx
4
Rx
Tx
3
Rx
Tx
FAIL
ACT
FC3_MR-4
ACT/LNK
ACT/LNK
ACT/LNK
ACT/LNK