Cisco Systems 1840 Electromagnetic Interference EMI, Electromagnetic Compatibility Compliance

Electromagnetic Interference (EMI)

•Connection of power supply: The router is intended for use when supplied with power from a supply providing 100 to 240 VAC, 50 to 60 Hz, up to 0.5A.

Electromagnetic Interference (EMI)

This section describes EMI compliance conditions for Cisco 1840 routers. It contains the following:

•Agency Approvals/Standards

•Electromagnetic Compatibility Compliance

•FCC Part 15 Notice

•Canada Class A Warning

•Statement 191—VCCI Class A Warning for Japan

•Statement 371—Power Cable and AC Adapter for Japan

Agency Approvals/Standards

This section lists the following agency approvals and standards for EMI:

•Electromagnetic Interference (EMI) for Cisco 1840 routers—EN55022 Class A

(CISPR 22 Class A) Europe, 47 CFR Part 15 Class A US Federal Communications Commission (FCC) USA, ICES 003 Class A (Industry Canada), VCCI Class A Japan, AS/NZS3548

Class A Australia/New Zealand, EN61000-3-2, EN61000-3-3, EN300386 Class A

•Immunity for Cisco 1840 routers—EN 55024, EN 55082-1, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8 (not applicable for most of Cisco equipment), EN 61000-4-11

Electromagnetic Compatibility Compliance

The product conforms to the requirements of European Directive 2004/108/EC by complying with the requirements set forth in EN55022 and EN50082-1.

This product range falls within the scope of the Telecommunications Terminal Equipment (TTE) Regulations 1992 (Statutory Instrument No. 2423/1992).

However, there is currently no common technical regulation (CTR) in force that covers this particular category of equipment. Therefore, the TTE regulations do not apply as specified in clauses 2(1), 4(3), and 6(1).

Accordingly, this product range conforms to the requirements of the national standards for connection to the network in accordance with section 22 of the 1984 Telecommunications act.

The installation and maintenance procedures in the installation and configuration guide must be followed to ensure compliance with these regulations.

Caution This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Regulatory Compliance and Safety Information for Cisco 1840 Routers

4 OL-10257-02