Cisco Systems 2600-DC Series manual Alarm Interface Controller Network Module

Table 3 Network Modules supported on the Cisco 2600 Series Serial and ATM NMs (requires IOS release 11.3 (3)T or later) (Continued)

Product Number	Description	Cisco 2612	Cisco 2600XM	Cisco 2691
NM-HD-2V	Two-slot IP Communications Voice/Fax		X	X
	Network Module
NM-HD-2VE	Two-slot IP Communications Enhanced		X	X
	Voice/Fax Network Module
Application Service Modules
NM-CIDS-K9	Cisco IDS Network Module, 20-GB IDE		X	X
	hard disk
NM-CE-BP-20G-K9	Content Engine Network Module, basic	X	X	X
	performance, 20-GB IDE hard disk
NM-CE-BP-40G-K9	Content Engine Network Module, basic	X	X	X
	performance, 40-GB IDE hard disk
NM-CE-BP-SCSI-K9	2-port E&M voice/fax interface card for	X	X	X
	voice/fax network module
NM-NAM	Network Analysis Module		X	X

1.,The voice/fax and ATM NMs require a Cisco IOS Plus feature set.

2.Requires Cisco IOS Version 12.05XK, 12.07T, 12.1, 12.1T, 12.2, 12.2T or later.

3.Requires Cisco IOS Version 12.1.2T or later.

4.4Requires Cisco IOS Version 12.2(2)XT, 12.2(8)T or later

5.requires Cisco IOS Version 12.2(8)T or later.

6.Requires Cisco IOS Version 12.2(2)XT, 12.2(8)T or later.

7.Inline power from a DC power source requires an external cable and circuit.

Alarm Interface Controller Network Module

The Alarm Interface Controller (AIC) is a network module that greatly expands the network monitoring and control capabilities of the Cisco 2600 and 3600 Series routers. The AIC functions as an integrated entity residing within the Cisco 2600 Router to provide network alarm monitoring and remote control of network elements. The AIC reduces service provider and enterprise operating expenses by facilitating a “single box” solution, doing away with the need for a dedicated external alarm monitoring device. This greatly simplifies network layout, monitoring, and control resulting in lower operations, administration, maintenance, and provisioning (OAM&P) costs. The AIC is supported in Cisco IOS® 12.2(8)T and beyond. The AIC network module supports 64 discrete alarm monitoring points, of which 8 of the last 64 alarm points are software- configurable to accept either analog or discrete inputs. The AIC further supports 16 control relays to facilitate the remote control of network elements.

Table 4 Alarm Interface Controller (AIC) Network Module Alarm Interface Controller (AIC) Network Module Product

Product Number	Description	Cisco 2612	Cisco 2600XM	Cisco 2691
NM-AIC-6411	Alarm monitoring and control NM;	X	X	X2
	64 contact points and 16 control points

1.Requires Cisco IOS Version 12.2(8)T or later.

2.Requires Cisco IOS Version 12.3(2)T or later on Cisco 2691.

Cisco Systems, Inc.

All contents are Copyright © 1992–2004 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.

Page 14 of 20