Cisco Systems 2600-DC Series manual Product Number, Description, Cisco 2600XM

Table 5 WAN Interface Cards for the Cisco 2600 Series Cisco 2600 Series WAN WICs (Continued)

			Cisco
Product Number	Description	Cisco 2612	2600XM	Cisco 2691
WIC-1B-U-V2	1-port ISDN BRI with NT1	X	X	X
WIC-1AM3	1-port Analog Modem interface card	X	X	X
WIC-2AM3	2-port Analog Modem interface card	X	X	X
WIC-1ADSL-DG	1-port ADSL WAN Interface with Dying		X	X
	Gasp
WIC-1ADSL4	1-port ADSL WAN Interface	X	X	X
WIC-1ADSL-I-DG	1-port ADSLoISDN WAN Interface		X	X
WIC-1SHDSL-V2	1-port G.SHDSL WAN Interface with two or		X	X
	four wire support
WIC-1SHDSL2	1-port G.SHDSL WAN Interface	X	X	X

1.Requires Cisco IOS 12.0(5)XK or later.

2.Requires Cisco IOS 12.2(4)XL or later.

3.Requires Cisco IOS 12.2(2)XB or later and IOS IP Plus feature set.

4.Requires Cisco IOS 12.1(5)YB, 12.2(2)XK, 12.2(4)T or later.

Table 6 Voice Interface Cards for Use with the Voice/Fax Network Modules Module Voice Interface Cards supported for use with the Voice/Fax NMs

Product Number	Description	Cisco 2612	Cisco 2600XM	Cisco 2691
VIC-2BRI-S/T-TE1	2-port BRI S/T terminal equipment voice/	X	X	X
	fax interface card for voice/fax NM
VIC2-2BRI-NT/TE3	2-port BRI (NT and TE) Voice Interface		X	X
	module
VIC-2BRI-NT/TE3	2-port BRI (NT and TE) Voice Interface	X	X	X
	module
VIC-2FXS	2-port FXS voice/fax interface card for	X	X	X
	voice/fax NM
VIC2-2FXS	2-port FXS voice/fax interface card for		X	X
	voice/fax NM
VIC-4FXS/DID	4-port FXS voice/fax interface card. (Note:		X	X
	The DID feature is not supported at this
	time.)
VIC-2FXO-M12	2-port FXO voice/fax interface card for	X	X	X
	voice/fax NM w/ Caller ID & supervisory
	disconnect (North American version and
	other countries)
VIC-2FXO	2-port FXO voice/fax interface card for	X	X	X
	voice/fax network module (North
	American version and other countries)

Cisco Systems, Inc.

All contents are Copyright © 1992–2004 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.

Page 16 of 20