Troubleshooting, 24.00 VDC | Turbo Chef Technologies NGC-1007

22 THE CONTROL SYSTEM

I S S U E	R E S O L U T I O N

F1: Blower Running	1. Status Indicator “A” is highlighted/backlit in TEST MODE.
Status Bad	Verify 208 or 240 (USA) / 230 (Intl) / 200 (Japan) / 220 (Latin America)
	VAC is going to the motor controller via pins 2 and 3.
Motor not running		208/240/230 VAC is present: Verify control wiring from the motor
when commanded.		controller and I/O control board, specifically low-voltage wire OR-9.
		If all wires are OK, then refer to page 50 for motor controller
		troubleshooting.
		208/240/230 VAC is not present: Correct wiring going to the motor
		controller. Also, check fuses.
	2. Status Indicator “A” is still highlighted in TEST MODE.
	Refer to page 50 for motor controller troubleshooting.

F3: Magnetron Current	1. Ensure the K2 mechanical relay is in good working order.
Low	If relay is OK, refer to pages 34-35 (F3: MAGNETRON CURRENT LOW) for
	detailed troubleshooting.

F8: Heat Rise Low	1. Verify the high-limit thermostat is not tripped.
	If high-limit is tripped, reset and allow the oven to warm up.
N O T E : This message	If high-limit is not tripped, proceed to instructions below.
occurs in WARM UP and
SELF TEST if the oven fails	High-limit thermostat is not tripped:
to warm up in the prede-	Check both K4 and K5 SSRs by activating them in TEST MODE (activate
termined time period.	HEATER and IR ELE). When actuated, the (-) control input of the SSR will
	go to 0.00 VDC. When the relay is not actuated, the input will read
	-24.00 VDC.
	If the control voltage is not pulled down during actuation, verify
		the wiring between SSR and I/O control board. Replace SSR if wiring
		is OK.
	If the control voltage is pulled down: Refer to Figure 37 on page 47.

NGC-1007 specifications

TurboChef Technologies has made a substantial impact in the commercial cooking industry with its advanced cooking equipment, and one of their standout products is the NGC-1007. The NGC-1007 is a revolutionary cooking oven designed to meet the demands of high-paced kitchens while ensuring superior cooking quality and efficiency.

One of the main features of the NGC-1007 is its high-speed cooking technology. Utilizing a combination of convection, impingement, and microwave cooking, this oven can reduce cooking times significantly while maintaining food quality. This multi-cooking method not only speeds up the cooking process but also enhances flavor and texture, making it ideal for cooking a wide variety of dishes, from pizzas to entrees.

The NGC-1007 also showcases advanced control technology, incorporating a user-friendly touch screen interface. This intuitive control panel allows chefs to easily navigate through various cooking settings and recipes, ensuring that each dish can be prepared to perfection. With programmable settings, operators can store favorite recipes and recall them at the touch of a button, improving efficiency and consistency in food preparation.

The design of the NGC-1007 reflects a commitment to reliability and durability. Built with high-quality materials, it can withstand the rigors of a bustling kitchen environment. Its compact size is perfect for establishments with limited space yet powerful enough to handle the demands of high-volume cooking.

Another key characteristic of the NGC-1007 is its energy efficiency. TurboChef has integrated innovative technology that reduces energy consumption without compromising cooking performance. This not only helps in cutting operational costs for restaurants but also aligns with sustainability goals by minimizing the environmental impact.

Furthermore, the NGC-1007 is equipped with easy-to-clean surfaces, making maintenance hassle-free. This is crucial in any busy kitchen, as it allows staff to focus on food preparation and service rather than extensive cleanup.

In summary, the TurboChef NGC-1007 is a game-changer for commercial kitchens looking to optimize their cooking processes. With its high-speed cooking capabilities, intuitive controls, durable construction, energy efficiency, and ease of maintenance, it stands out as a reliable option for chefs aiming to elevate their culinary output while managing time and resources effectively.

Turbo Chef Technologies NGC-1007 VAC is going to the motor controller via pins 2, Troubleshooting

Models: NGC-1007

VAC is going to the motor controller via pins 2 and 3.