DIAGNOSTIC MODE

16 THE CONTROL SYSTEM

Diagnostic Display (Screen 2)

The DIAG key turns on or off the diagnostic display feature. When this feature is enabled, the oven will display temperature and cook cycle parameters when the oven is cooking or idle.

In addition, the status indicators are displayed on the bottom of the screen. When a status indicator is highlighted/backlit the corresponding system is off or open. For example: W would indicate that the Microwave System is off.

The STATUS INDICATOR section below offers a more detailed description of each indicator.

COOKS (Screen 2)

Press once to display the total number of cook counts for all recipes. Press again to display the total amount of time the oven has been in cook cycles.

ACCUM (Screen 2)

Press once to display the total amount of time the magnetrons have been on. Press again to display the total amount of time the oven has been on.

Electronic Compartment Temperature (Screen 2)

The ºELEC key displays the temperature inside the electronic compartment.

F/C (Screen 2)

Changes how the oven’s temperature units are dis- played. The F/C key alternately selects Fahrenheit or Celsius.

IR SI (Screen 2)

Displays the idle IR set point. This temperature is a factory setting and should never be altered. If an incorrect temperature has been entered, consult the factory before changing this value.

STATUS INDICATORS

See Figures 9 and 10 on page 15.

PPrimary switch – closed or open S Secondary switch – closed or open M Monitor switch – closed or open

t Magnetron thermostats – closed or open h Main convection heater – off or on

i IR element – off or on

A Blower motor controller – enabled or disabled W Microwave current – Less than or greater than 7

Amps*

*Microwave (W) status indicator is not highlighted/backlit when the current is more than 7 Amps.

Status indicators are displayed at the bottom of the display screen when the oven is in TEST MODE, or during normal oven operation if in

(DIAG was turned on). Refer to Figures 9 and 10.

If a status indicator is highlighted/backlit, the item or component is in an un-energized or off state. Conversely, if a status indicator is not highlighted, the component is in an energized or on state.

PROGRAMMING

Edit Mode

The EDIT MODE enables the operator to manually alter recipes and the cook cavity temperature (CCSP).

To access EDIT MODE:

1.Simultaneously press the UP and DOWN keys.

2.When prompted, enter the access code “9” and then press the ENTER key.

NOTE: If this does not provide access, refer to page 19 for enable/disable codes.

Changing the Cook Chamber Temperature

This temperature is a factory setting - exercise caution before altering it. For best results, consult the factory before changing this value.

Page 25 Page 27
Page 26
Image 26
Turbo Chef Technologies NGC-1007 service manual Diagnostic Display Screen, Cooks Screen, Accum Screen, IR SI Screen
Page 25 Page 27

NGC-1007 specifications

TurboChef Technologies has made a substantial impact in the commercial cooking industry with its advanced cooking equipment, and one of their standout products is the NGC-1007. The NGC-1007 is a revolutionary cooking oven designed to meet the demands of high-paced kitchens while ensuring superior cooking quality and efficiency.

One of the main features of the NGC-1007 is its high-speed cooking technology. Utilizing a combination of convection, impingement, and microwave cooking, this oven can reduce cooking times significantly while maintaining food quality. This multi-cooking method not only speeds up the cooking process but also enhances flavor and texture, making it ideal for cooking a wide variety of dishes, from pizzas to entrees.

The NGC-1007 also showcases advanced control technology, incorporating a user-friendly touch screen interface. This intuitive control panel allows chefs to easily navigate through various cooking settings and recipes, ensuring that each dish can be prepared to perfection. With programmable settings, operators can store favorite recipes and recall them at the touch of a button, improving efficiency and consistency in food preparation.

The design of the NGC-1007 reflects a commitment to reliability and durability. Built with high-quality materials, it can withstand the rigors of a bustling kitchen environment. Its compact size is perfect for establishments with limited space yet powerful enough to handle the demands of high-volume cooking.

Another key characteristic of the NGC-1007 is its energy efficiency. TurboChef has integrated innovative technology that reduces energy consumption without compromising cooking performance. This not only helps in cutting operational costs for restaurants but also aligns with sustainability goals by minimizing the environmental impact.

Furthermore, the NGC-1007 is equipped with easy-to-clean surfaces, making maintenance hassle-free. This is crucial in any busy kitchen, as it allows staff to focus on food preparation and service rather than extensive cleanup.

In summary, the TurboChef NGC-1007 is a game-changer for commercial kitchens looking to optimize their cooking processes. With its high-speed cooking capabilities, intuitive controls, durable construction, energy efficiency, and ease of maintenance, it stands out as a reliable option for chefs aiming to elevate their culinary output while managing time and resources effectively.
Top Page Image Contents