34 THE MICROWAVE SYSTEM

MICROWAVE SYSTEM TROUBLESHOOTING

I S S U E

R E S O L U T I O N

 

 

Magnetron

W A R N I N G : Never test the secondary voltages. Voltage on this side of the

Troubleshooting

circuit is lethal, reaching up to 5000 volts!

Guidelines

 

 

All tests performed on the components are done with the oven unplugged

 

and the capacitors discharged.

 

The capacitors in this oven utilize a device that will automatically discharge

 

the voltage.

 

W A R N I N G : Always verify the capacitor is discharged before servicing the

 

components.

 

Discharging can be done by unplugging the oven and then short across the

 

red wire on each capacitor to the chassis with an insulated screwdriver.

 

 

F3: Magnetron

1. Remove the top and right side covers.

Current Low

2. Enter the test mode. (From the OVEN OFF mode, simultaneously press

 

BACK and ENTER keys, enter the code 9-4-2-8 and press ENTER).

 

3. Place amp meter on the brown (US ovens) or blue (International ovens)

 

"ct" wire for amp reading. Wire is coming from the primary side of the

 

HV transformers and looping through the black plastic current trans-

 

former on the main control board and back to the HV transformers.

 

4. Press and hold the MGTRON soft key on the keypad to energize the

 

magnetrons.

 

5. Observe the amperage on the meter. Typical readings are:

 

† NORTH AMERICA: 12-14 amps at 240VAC/13-16 amps at 208VAC.

 

† INTERNATIONAL: 12-15 amps at 230VAC

 

† BRAZIL: 12-15 amps at 220VAC

 

† JAPAN: 16-17 amps at 200VAC

 

If proper amperage appears but takes longer than 2 complete seconds to

 

appear, call TurboChef Tech support for assistance. If amperage is present

 

but lower than typical readings, perform the troubleshooting steps in the

 

previous pages of this section. If amperage is not present, check the condi-

 

tion of the F3 fuse. Fuse must be a 20-amp fuse and is the right-most of

 

the three fuses on the bottom of the oven.

 

If fuse has failed, replace the fuse after troubleshooting (previous pages of

 

this section). If fuse has not failed, check the incoming (primary side)

 

voltage to the high-voltage transformers.

 

 

Page 44
Image 44
Turbo Chef Technologies NGC-1007 Magnetron, Components, Remove the top and right side covers, † Japan 16-17 amps at 200VAC

NGC-1007 specifications

TurboChef Technologies has made a substantial impact in the commercial cooking industry with its advanced cooking equipment, and one of their standout products is the NGC-1007. The NGC-1007 is a revolutionary cooking oven designed to meet the demands of high-paced kitchens while ensuring superior cooking quality and efficiency.

One of the main features of the NGC-1007 is its high-speed cooking technology. Utilizing a combination of convection, impingement, and microwave cooking, this oven can reduce cooking times significantly while maintaining food quality. This multi-cooking method not only speeds up the cooking process but also enhances flavor and texture, making it ideal for cooking a wide variety of dishes, from pizzas to entrees.

The NGC-1007 also showcases advanced control technology, incorporating a user-friendly touch screen interface. This intuitive control panel allows chefs to easily navigate through various cooking settings and recipes, ensuring that each dish can be prepared to perfection. With programmable settings, operators can store favorite recipes and recall them at the touch of a button, improving efficiency and consistency in food preparation.

The design of the NGC-1007 reflects a commitment to reliability and durability. Built with high-quality materials, it can withstand the rigors of a bustling kitchen environment. Its compact size is perfect for establishments with limited space yet powerful enough to handle the demands of high-volume cooking.

Another key characteristic of the NGC-1007 is its energy efficiency. TurboChef has integrated innovative technology that reduces energy consumption without compromising cooking performance. This not only helps in cutting operational costs for restaurants but also aligns with sustainability goals by minimizing the environmental impact.

Furthermore, the NGC-1007 is equipped with easy-to-clean surfaces, making maintenance hassle-free. This is crucial in any busy kitchen, as it allows staff to focus on food preparation and service rather than extensive cleanup.

In summary, the TurboChef NGC-1007 is a game-changer for commercial kitchens looking to optimize their cooking processes. With its high-speed cooking capabilities, intuitive controls, durable construction, energy efficiency, and ease of maintenance, it stands out as a reliable option for chefs aiming to elevate their culinary output while managing time and resources effectively.