THE CONVECTION CIRCUIT

49

CONVECTION CIRCUIT TROUBLESHOOTING

I S S U E

R E S O L U T I O N

 

 

F8: Heat Low

1. Check that the blower motor is moving air.

 

† Blower motor is not moving air: Check blower motor assembly

Oven Not Warming Up

 

and verify motor is stalled. Unplug oven and correct obstruction or

 

 

replace motor. (For access to motor shaft, remove top panel.)

 

† Blower motor is moving air: Verify high-limit thermostat is

 

 

not tripped. See the high-limit thermostat information below.

 

High-Limit Thermostat:

 

† Thermostat tripped: Reset and determine why the thermostat

 

 

tripped (See Figure 38, Item 114). Look for excess build up of

 

 

grease inside the oven or any other source for a fire.

 

† Thermostat is not tripped: Check main convection heater.

 

 

1. Convection heater is defective: Unplug oven and replace the

 

 

convection heater and verify the K4 SSR (Figure 37) is not

 

 

shorted across output.

 

 

2. Convection heater OK: Check the K4 SSR.

 

 

† K4 defective: Unplug oven and replace.

 

 

† K4 OK: Unplug oven and verify all wiring. Verify P1 voltage on

 

 

I/O board is 5.0VDC (+/- 0.02) - see Figure 40, page 54.

 

 

F2: Cook Temperature

1. Verify Cook Door Operation.

Low

†

“Cook Door Open” Message: Verify which switch is not actuating

 

 

and readjust. See pages 38-43.

 

†

Cook Door OK: Verify high-limit thermostat is not tripped. See

 

 

the high-limit thermostat below.

 

High-Limit Thermostat:

 

†

Thermostat tripped: Reset and determine why the thermostat

 

 

tripped (See Figure 38, Item 114). Look for excess build up of

 

 

grease inside the oven or any other source for a fire.

 

†

Thermostat is not tripped: Check main convection heater.

 

 

1. Convection heater is defective: Unplug oven and replace the

 

 

convection heater and verify the K4 SSR (Figure 37) is not

 

 

shorted across output.

 

 

2. Convection heater OK: Check the K4 SSR.

 

 

† K4 defective: Unplug oven and replace.

 

 

† K4 OK: Unplug oven and verify all wiring. Verify P1 voltage on

 

 

I/O board is 5.0VDC (+/- 0.02) - see Figure 40, page 54.

 

 

 

Page 60 Page 62
Page 61
Image 61
Turbo Chef Technologies NGC-1007 Replace motor. For access to motor shaft, remove top panel, Shorted across output
Page 60 Page 62

NGC-1007 specifications

TurboChef Technologies has made a substantial impact in the commercial cooking industry with its advanced cooking equipment, and one of their standout products is the NGC-1007. The NGC-1007 is a revolutionary cooking oven designed to meet the demands of high-paced kitchens while ensuring superior cooking quality and efficiency.

One of the main features of the NGC-1007 is its high-speed cooking technology. Utilizing a combination of convection, impingement, and microwave cooking, this oven can reduce cooking times significantly while maintaining food quality. This multi-cooking method not only speeds up the cooking process but also enhances flavor and texture, making it ideal for cooking a wide variety of dishes, from pizzas to entrees.

The NGC-1007 also showcases advanced control technology, incorporating a user-friendly touch screen interface. This intuitive control panel allows chefs to easily navigate through various cooking settings and recipes, ensuring that each dish can be prepared to perfection. With programmable settings, operators can store favorite recipes and recall them at the touch of a button, improving efficiency and consistency in food preparation.

The design of the NGC-1007 reflects a commitment to reliability and durability. Built with high-quality materials, it can withstand the rigors of a bustling kitchen environment. Its compact size is perfect for establishments with limited space yet powerful enough to handle the demands of high-volume cooking.

Another key characteristic of the NGC-1007 is its energy efficiency. TurboChef has integrated innovative technology that reduces energy consumption without compromising cooking performance. This not only helps in cutting operational costs for restaurants but also aligns with sustainability goals by minimizing the environmental impact.

Furthermore, the NGC-1007 is equipped with easy-to-clean surfaces, making maintenance hassle-free. This is crucial in any busy kitchen, as it allows staff to focus on food preparation and service rather than extensive cleanup.

In summary, the TurboChef NGC-1007 is a game-changer for commercial kitchens looking to optimize their cooking processes. With its high-speed cooking capabilities, intuitive controls, durable construction, energy efficiency, and ease of maintenance, it stands out as a reliable option for chefs aiming to elevate their culinary output while managing time and resources effectively.
Top Page Image Contents