THE CONTROL SYSTEM

15

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TEST NGC XXXXX

 

 

 

 

CC 810F

IR 5000F

 

 

 

 

BLOWER

 

HEATER

 

 

 

 

FAULTS

MGTRON

 

 

 

 

STEST

 

 

IR ELE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

P S M t

h

 

i

A

W

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F I G U R E 8: Accessing Test Mode

F I G U R E 9: Test Mode - Screen 1

TEST NGC XXXXX

CC 810F

IR 5000F

DIAG

0ELEC

COOKS

F/C

ACCUM

IR SI

P S M t h i A W

F I G U R E 10: Test Mode - Screen 2

To enter TEST MODE (Figure 8):

1. Press the BACK key until the display is in the OFF

STATE.

2.Simultaneously press BACK and ENTER keys.

3.When prompted, enter the access code: 9-4-2-8 and press ENTER.

The TEST MODE displays the software version, actu- al cook chamber temperature, and actual IR element temperature at the top of the screen. The TEST MODE consists of 2 screens (Figures 9 and 10). To display the second screen, press either the UP or DOWN key. To test a component or sub-system, press the corresponding soft key.

TEST FUNCTION OPTIONS

Blower Speed (Screen 1)

The BLOWER key increments the blower motor speed in 10% increments. When the speed is 100%, the next press sets the speed to 0%.

NOTE: If this function is being used to expedite cooling, open the oven door to further expedite.

Faults (Screen 1)

Pressing the FAULTS soft key will display all the accumulated faults in the Fault Log. Press “0” to zero the fault counter. For more information, see page 11.

Self-Test Function (Screen 1)

The STEST key initiates a self-test to test all major components of the oven (including door switches). To run the self-test, press the corresponding soft key once. Press the BACK key to return to the OVEN

OFF/COOLING DOWN mode.

Heater Test (Screen 1)

Press the HEATER key to turn the heater on. Heater will remain on until key is pressed again to turn it off. If the blower speed is 0, the blower speed is set to idle airflow (10%).

Magnetron (Screen 1)

Press and hold the MGTRON key to test the mag- netrons. Doing so requires a 5-second warm-up period. Once the MGTRON key is released, the high voltage supply is switched off to the magnetron and the magnetron will stop radiating; however, the power is still supplied to the magnetron cooling fan for an extra 4 minutes, 15 seconds.

IR ELE (Screen 1)

Pressing the IR ELE key will turn on the IR element. When pressed, the screen will read IR ELEMENT ON. Press the IR ELE key again to turn it off.

Page 25
Image 25
Turbo Chef Technologies NGC-1007 Blower Speed Screen, Faults Screen, Self-Test Function Screen, Heater Test Screen

NGC-1007 specifications

TurboChef Technologies has made a substantial impact in the commercial cooking industry with its advanced cooking equipment, and one of their standout products is the NGC-1007. The NGC-1007 is a revolutionary cooking oven designed to meet the demands of high-paced kitchens while ensuring superior cooking quality and efficiency.

One of the main features of the NGC-1007 is its high-speed cooking technology. Utilizing a combination of convection, impingement, and microwave cooking, this oven can reduce cooking times significantly while maintaining food quality. This multi-cooking method not only speeds up the cooking process but also enhances flavor and texture, making it ideal for cooking a wide variety of dishes, from pizzas to entrees.

The NGC-1007 also showcases advanced control technology, incorporating a user-friendly touch screen interface. This intuitive control panel allows chefs to easily navigate through various cooking settings and recipes, ensuring that each dish can be prepared to perfection. With programmable settings, operators can store favorite recipes and recall them at the touch of a button, improving efficiency and consistency in food preparation.

The design of the NGC-1007 reflects a commitment to reliability and durability. Built with high-quality materials, it can withstand the rigors of a bustling kitchen environment. Its compact size is perfect for establishments with limited space yet powerful enough to handle the demands of high-volume cooking.

Another key characteristic of the NGC-1007 is its energy efficiency. TurboChef has integrated innovative technology that reduces energy consumption without compromising cooking performance. This not only helps in cutting operational costs for restaurants but also aligns with sustainability goals by minimizing the environmental impact.

Furthermore, the NGC-1007 is equipped with easy-to-clean surfaces, making maintenance hassle-free. This is crucial in any busy kitchen, as it allows staff to focus on food preparation and service rather than extensive cleanup.

In summary, the TurboChef NGC-1007 is a game-changer for commercial kitchens looking to optimize their cooking processes. With its high-speed cooking capabilities, intuitive controls, durable construction, energy efficiency, and ease of maintenance, it stands out as a reliable option for chefs aiming to elevate their culinary output while managing time and resources effectively.