42 THE OVEN DOOR

72 71

73

74

APPLY HI-TEMP

GREASE TO AREA

70

2

1

75

3

76

F I G U R E 32: Primary Switch Adjustment and Parts - New Switch Setup

ADJUSTING THE PRIMARY INTERLOCK SWITCH -

NEW SWITCH SETUP

The new switch assembly is identifiable by the pri- mary switch being located on the left side of the oven. Also, the serial number of the oven will fol- low the formatting below (X = variable digit/letter):

NGCD(5 thru 9)XXXX (North America) NGCXXD(5 thru 9)XXXX (International)

1.When the oven completes BURN IN (if

required, see page 38), closely examine the latch toggle position using the door switch gauge (Item 75).

2.If the toggle is past the top of the window, you must correct the toggle's position by installing an 0.030” Shim (Item 76). See Figure 32.

3.Verify position of toggle by opening and closing the oven door.

4.With the toggle correctly adjusted and the door closed, adjust the primary switch by loosening the two #4-40 screws and #8-32 screw.

5.Using a 0.030” (0.762 mm) spacer as a template (included with Item 74), adjust switch lever position to a maximum allowable distance of 0.030” (0.762 mm).

6.Open and close the door several times to verify the switch gap.

PRIMARY SWITCH ADJUSTMENT AND PARTS

Figure 32

70.102809 Screw, #8-32 x 3/8” 100Þ CSK

71.102921 Screw, #8-32 x 3/8”

72.101555 Screw, #4-40 x 3/4”

73.102012 Interlock Switch

74.NGC-3033 Assy, Door Switch*

75.Adjustment Tools (included with Item 74) NGC-1215 Door Switch Gauge NGC-1340 Shim Tool, 0.060” NGC-1344 Shim Tool, 0.030”

76.NGC-1169-1 Shim, 0.030” NGC-1169-2 Shim, 0.045”

*Refer to FSB-10057 (included with Item 74) for instructions on converting NGC-3033 kit into the new switch assembly.

Assembly Notes

1.Tip of toggle must be within window notch. Optimal is centered or below centered when the oven is hot.

2.Tip of toggle adjustment notch. Toggle must be within notch when oven is hot.

3.If toggle “hangs” in position as shown, decrease number of shims.

Page 53
Image 53
Turbo Chef Technologies NGC-1007 service manual Adjusting the Primary Interlock Switch NEW Switch Setup

NGC-1007 specifications

TurboChef Technologies has made a substantial impact in the commercial cooking industry with its advanced cooking equipment, and one of their standout products is the NGC-1007. The NGC-1007 is a revolutionary cooking oven designed to meet the demands of high-paced kitchens while ensuring superior cooking quality and efficiency.

One of the main features of the NGC-1007 is its high-speed cooking technology. Utilizing a combination of convection, impingement, and microwave cooking, this oven can reduce cooking times significantly while maintaining food quality. This multi-cooking method not only speeds up the cooking process but also enhances flavor and texture, making it ideal for cooking a wide variety of dishes, from pizzas to entrees.

The NGC-1007 also showcases advanced control technology, incorporating a user-friendly touch screen interface. This intuitive control panel allows chefs to easily navigate through various cooking settings and recipes, ensuring that each dish can be prepared to perfection. With programmable settings, operators can store favorite recipes and recall them at the touch of a button, improving efficiency and consistency in food preparation.

The design of the NGC-1007 reflects a commitment to reliability and durability. Built with high-quality materials, it can withstand the rigors of a bustling kitchen environment. Its compact size is perfect for establishments with limited space yet powerful enough to handle the demands of high-volume cooking.

Another key characteristic of the NGC-1007 is its energy efficiency. TurboChef has integrated innovative technology that reduces energy consumption without compromising cooking performance. This not only helps in cutting operational costs for restaurants but also aligns with sustainability goals by minimizing the environmental impact.

Furthermore, the NGC-1007 is equipped with easy-to-clean surfaces, making maintenance hassle-free. This is crucial in any busy kitchen, as it allows staff to focus on food preparation and service rather than extensive cleanup.

In summary, the TurboChef NGC-1007 is a game-changer for commercial kitchens looking to optimize their cooking processes. With its high-speed cooking capabilities, intuitive controls, durable construction, energy efficiency, and ease of maintenance, it stands out as a reliable option for chefs aiming to elevate their culinary output while managing time and resources effectively.