Supported Cisco Switches
Cisco Catalyst 3750 Metro Series Switches
124
Cisco Active Network Abstraction VNE Reference
OL-15002-01
Supported Network Resource Management Components for Cisco Catalyst 3750 Metro Series Switches
The following Network Resource Management components support for Cisco Catalyst 3750 Metro
Series Switches:
•Supported Protocols for Configuration Archive, page124
•Supported Protocols for Network Element Image Management, page 125
•Supported Protocols for Command Builder, page125
Supported Protocols for Configuration Archive
VPN (VRF) Route Targets Route Targets In this technique, each VRF is identified with the set of its
import and export route targets.
The matching criteria between VRF entities is to have at least
one pair of import and export route target of one VRF to
export and import route target of the other VRF.
PWE (Martini) PWE3 Information PWE3 Information Each pseudowire is identified by the following criteria:
1. Local and remote router IP.
2. Tunnel ID.
The matching between pseudowire tunnels Pw1 and Pw2 is
done by comparing:
1. The Pw1 local IP to Pw2 remote IP and Pw1 remote IP to
Pw2 local IP.
2. Tunnel ID
Table136 Supported Topologies for Cisco Catalyst 3750 Metro Series Switches (continued)
Topology Type
Topology Discovery
Technique
Topology Verification
Technique Additional Information
Table137 Supported Protocols for Configuration Archive for Cisco Catalyst 3750 Metro Series
Switches
Functionality SNMP Telnet
Fetching the running and startup configuration Yes Yes
Deploying the running and startup configuration Yes Yes
Fetching Running Configuration timestamp Yes Yes
Fetching Startup Configuration timestamp Yes No
Fetching VLAN Configuration timestamp No Yes