Supported Cisco Switches
Cisco Catalyst 3550 Series Switches
100
Cisco Active Network Abstraction VNE Reference
OL-15002-01
Supported Topologies for Cisco Catalyst 3550 Series Switches Base Logical
Component
Memory
Overutilized
Yes Cisco ANA 4.0 No
Routing Protocols BGP Neighbor
Loss
Yes Cisco ANA 4.0 No
Table106 Supported Topologies for Cisco Catalyst 3550 Series
Topology Type Topology Discovery Technique Topology Verification Technique Additional Information
Physical Layer CDP CDP The ports are tested on separate VNEs
by checking the VNE management IP.
CDP (Cisco Discovery Protocol)
includes any upper-layer techniques,
such as MAC in Ethernet. In this
technique the matching criteria is the
CDP neighboring information.
Physical Layer Static — You can create a static link between
managed network elements by
selecting the two end ports of the
network elements. To create a static
topological link, select the exact
location of the two end ports (at both
ends of the link).
For information on creating a Static
link, see Cisco Active Network
Abstraction 4.0.2 User and
Administration Guide on Cisco.com:
http://www.cisco.com/en/US/products/
ps6776/products_user_guide_list.html
Ethernet MAC address Ethernet counters •MAC: Ethernet port MAC is
determined using bridge and ARP
tables. This technique discovers
links between routers and links
between router and switch. It does
not discover links between
switches.
•Ethernet Counters: Based on the
unicast packets traffic signature.
MPLS Not supported Not supported —
BGP Not supported Not supported —
VPN (VRF) Not supported Not supported —
Tunnel Not supported Not supported —
Table105 Supported Alarms for Cisco Catalyst 3550 Series Switches (continued)
Technologies Event Name Supported Support Added In Expedited