Supported Cisco Switches
Cisco Catalyst 6500 Series Switches
112
Cisco Active Network Abstraction VNE Reference
OL-15002-01
Supported Network Resource Management Components for Cisco Catalyst 6500 Series Switches
The following Network Resource Management components support for Cisco Catalyst 6500 Series
Switches:
•Supported Protocols for Configuration Archive, page112
•Supported Protocols for Network Element Image Management, page 113
•Supported Protocols for Command Builder, page113
Supported Protocols for Configuration Archive
VPN (VRF) Route Targets Route Targets Each VRF is identified with the set of
its import and export route targets.
The matching criteria between VRF
entities is to have at least one pair of
import and export route target of one
VRF to export and import route target
of the other VRF.
Tunnel Pseudowire Emulation Edge to
Edge (PWE3) Information
PWE3 Information Each pseudowire is identified by the
following criteria:
1. Local and remote router IP.
2. Tunnel ID.
The matching between pseudowire
tunnels Pw1 and Pw2 is done by
comparing:
1. The Pw1 local IP to Pw2 remote IP
and Pw1 remote IP to Pw2 local IP.
2. Tunnel ID
Table120 Supported Topologies for Cisco 6500 Series (continued)
Topology Type Topology Discovery Technique Topology Verification Technique Additional Information
Table121 Supported Protocols for Configuration Archive for Cisco Catalyst 6500 Series
Functionality SNMP Telnet
When request is from VNE
Fetching running configuration No Yes
Fetching running configuration timestamp Yes No
Fetching startup configuration timestamp Yes No
Fetching VLAN1 configuration timestamp No Yes
When request is from Configuration Archive application
Fetching the running and startup configuration Yes No
Deploying the running and startup configuration Yes No