1-19
Cisco 3200 Series Router Hardware Reference
OL-5816-10
Chapter 1 Cisco 3200 Rugged Enclosures
Cisco 3230 Rugged Enclosure I/O End Cap LED Indications
Table 1-3 lists the LEDs for the Cisco 3230 Rugged Enclosure I/O end caps and their indications.
WMIC Console LEDs
WMIC console LEDs function in installation mode or operational mode. The WMIC is set to the
installation mode by default. To change the function of the WMIC, use the station role command.
Table 1-4 shows the status of the LEDs when the WMIC is in installation mode (signal strength).
Tab l e 1-3 LEDs for Cisco 3230 Router I/O End Caps
LED Indication
MARC Solid green: OK.
Blinking: Booting and self-testing.
Black: Not OK or the power is off.
Serial Status/Link (1 status/link LED per
serial port)
Solid green: Link OK.
Black: No link is detected.
Amber blink: Activity.
Fast Ethernet (2 LEDs per Fast Ethernet
port)
Link LED
Solid green: Link OK.
Black: No link is detected.
Activity LED
Black: No activity.
Green blink: Activity.
WMIC Console (Installation or Operation
Mode)
For installation mode, see Table 1-4 on page 1-19.
For operation mode, see Table 1-5 on page 1-20.
Tab l e 1-4 WMIC Installation Mode
RSSI (dBm) Status LED Radio LED
> –51 Steady Steady
–58 to –54 Fast blinking (16 Hz) Steady
–60 to –57 Slow blinking (4 Hz Steady
–63 to –60 Very slow blinking (2 Hz) Steady
–66 to –63 Black Steady
–69 to –66 Black Fast blinking (16 Hz)
–72 to –69 Black Slow blinking (4 Hz
–75 to –72 Black Very slow blinking (2 Hz)
< –75 Black Black